Richard
- Total activity 9
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Activity overview
Latest activity by Richard-
Richard created an article,
How to Reset a POE Camera
If you need to reset your POE camera (e.g., to resolve configuration issues or video loss), follow the step-by-step methods below in order:1. Reset via Monitor (IPC Channel Configuration)On your ...
-
Richard created an article,
POE Camera Video Loss: Troubleshooting Guide
If your POE camera displays a "video loss" message, follow the step-by-step solutions below to resolve the issue: 1. Verify Power Supply and ConnectionsFirst, confirm if the camera is receiving pow...
-
Richard created an article,
4G LTE Battery PTZ Camera Quick Start Guide
More question,feel free to let us know~
-
Richard created an article,
PoE Switch Quick Start Guide
Applied to :POE SWITCH Front Panel:Port LEDs:Off:No devices connectedFlashing:Transmitting/receiving dataPower Indicator:On:Power on Off:Power offBack Panel:Power Port:Plea...
-
Richard created an article,
Precautions for POE Switch Operation
NOTE: Please read the following precautions and warnings carefully before using the product. Precautions: • Please do not expose the device to environments with soot, dust or high humidity. Failure...
-
Richard created an article,
Window Camera
Applied to window Ai camera;IT you cant find the device in the above steps , press and hold the reset button for 5 seconds,restore the camera to factory settings and try again. *If Bluetooth is no...
-
Richard created an article,
Poe Nvr
Applied to Poe Nvr; ① Connect the Cameras to the PoE NVR with 60ft(18.3m) Ethernet Cable.② Connect the PoE NVR to the Router with 3ft(1m) Ethernet Cable.③ Connect the PoE NVR to the Monitor with VG...
-
Richard created an article,
C183 Poe camera
Applied to c183 poe camera; 1. Connect the camera to the PoE switch or injector.1. Connect the camera to the PoE port of NVR via an Ethernet ca 2. After the device is powered on, the NVR will autom...
-
Richard created an article,
C220 Poe Camera
Applied to C220 poe camera; 1. Connect the camera to the PoE switch or injector.1. Connect the camera to the PoE port of NVR via an Ethernet ca 2. After the device is powered on, the NVR will aut...